1.2mm Carbon Rods 1000mm (2 Pcs) – Lightweight Carbon Fiber Rods for RC, Drone & DIY

Looking for reliable 1.2mm carbon rods for your RC plane, drone, Bionic Butterfly, robotics project or DIY build? RotorKart offers lightweight carbon fiber rods designed for hobbyists, makers, students, engineers and RC enthusiasts across India.

These 1.2mm carbon rods feature a slim 1.2mm diameter and 1000mm (1 meter) length, making them suitable for lightweight model-building and custom applications where a thin carbon fiber rod is required. The long 1000mm length gives you flexibility to measure and cut the material according to your project’s requirements.

This pack contains 2 pieces of 1.2mm × 1000mm carbon fiber rods, making it a practical choice for new builds, repairs, prototypes and DIY projects.

1.2mm Carbon Rods for RC, Drone & DIY Projects

1.2mm carbon rods are a useful choice for lightweight RC models, drones, Bionic Butterfly projects, robotics and DIY applications.

The slim diameter makes these rods suitable for projects where a compact and lightweight structural component is required. The 1000mm length provides enough material for custom fabrication, repairs and model construction.

Depending on the design, these carbon fiber rods can be used for suitable supports, reinforcement, braces and custom structural components.

For flight-critical applications, always select the rod diameter according to the specific design, expected loads and structural requirements of your project.

Key Features

• 1.2mm diameter for lightweight applications
• 1000mm / 1-meter length
• Solid round carbon fiber construction
• Lightweight and rigid material
• Smooth surface finish
• Suitable for RC model projects
• Useful for selected drone and UAV projects
• Suitable for Bionic Butterfly and ornithopter projects
• Useful for robotics and STEM projects
• Can be cut to custom lengths
• 2-piece pack
• Suitable for hobbyists, makers and DIY builders

Product Specifications

Lightweight 1.2mm Carbon Fiber Rods

The 1.2mm carbon fiber rods are designed for applications where a slim and lightweight rod is preferred.

Carbon fiber is commonly selected for projects where reducing unnecessary weight while maintaining useful rigidity is important. The 1.2mm size provides a compact option for model builders and makers working with smaller structures and lightweight components.

The 1000mm length also makes the rod convenient for custom fabrication. Instead of purchasing only short pre-cut sections, you can measure the required length and cut the rod according to your project’s design.

1.2mm Carbon Rods for RC Planes

These 1.2mm carbon rods can be considered for suitable RC airplane and model aircraft applications.

Depending on the design, they may be useful for lightweight reinforcement, supports, braces and custom model components. The slim profile can be useful when working with smaller RC models where available space and overall weight are important considerations.

The full 1-meter length provides flexibility when creating custom components or repairing an existing RC model.

Always verify the required diameter and strength for flight-critical components before installation.

1.2mm Carbon Rods for Drone Projects

The 1.2mm carbon rods 1000mm can also be useful for selected drone and UAV DIY projects.

Their slim profile makes them convenient for lightweight supports, experimental structures, reinforcement and custom drone projects where a thin solid rod is appropriate.

The 1000mm length allows you to cut the material according to your design requirements.

For flight-critical drone components, make sure the selected rod is suitable for the expected loads, vibration and mechanical requirements of your particular design.

Bionic Butterfly & Ornithopter Projects

The lightweight nature and slim diameter of 1.2mm carbon rods make them an interesting option for suitable Bionic Butterfly and ornithopter projects.

They can be considered for lightweight supports, custom structures and mechanical components depending on the design.

For projects involving moving wings or mechanisms, select the appropriate rod size according to the mechanical load and dimensions of the finished model.

Robotics, STEM & DIY Applications

The applications of these 1.2mm carbon rods are not limited to RC aircraft and drones.

They can also be useful for robotics prototypes, STEM projects, educational models, engineering experiments and DIY builds.

Possible applications include:

• RC airplanes
• RC gliders
• Drone prototypes
• Bionic Butterfly projects
• Ornithopters
• Robotics
• STEM projects
• Model making
• DIY engineering
• Educational models
• Lightweight supports
• Custom reinforcement
• Engineering prototypes
• Maker projects

The suitability of the rod depends on the specific requirements of each project.

Easy to Cut and Customize

Each rod is 1000mm long, allowing you to cut it to the length required for your project.

When cutting carbon fiber, use suitable tools and safety equipment. Cutting carbon fiber can produce fine dust, so use appropriate eye and respiratory protection and work in a properly ventilated area.

After cutting, inspect the cut end and remove any loose fibres before installing the rod into your project.

Choosing the Right Carbon Fiber Rod Size

Choosing the correct diameter is important when building RC, drone, robotics and DIY projects.

The 1.2mm carbon rods provide a slim option for projects that require a smaller diameter than larger carbon fiber rods.

If you need another size, you can compare RotorKart’s 1mm, 1.5mm and 1.8mm carbon fiber rods. Larger sizes are also available for applications that require a larger diameter.

Choose the size according to your project’s dimensions, expected loads and structural requirements.

Why Buy Carbon Fiber Rods from RotorKart?

RotorKart supplies RC parts, carbon fiber components, drone parts, DIY electronics and engineering materials for hobbyists, makers and professionals in India.

Our carbon fiber range is designed to provide builders with different rod diameters for different types of projects. Whether you are working on an RC aircraft, drone, Bionic Butterfly, robotics prototype or DIY model, choosing the appropriate diameter helps you build according to your project’s requirements.

Explore More Carbon Fiber Rods

Looking for another size?

Explore the Carbon Fiber Rods range at RotorKart to compare different diameters for RC, drone, robotics, Bionic Butterfly and DIY projects.

You can also compare the 1mm Carbon Fiber Rod, 1.5mm Carbon Fiber Rod and 1.8mm Carbon Fiber Rod if you need a different diameter for your project.

Frequently Asked Questions

What is the diameter of these carbon rods?

The diameter is 1.2mm.

What is the length of each rod?

Each rod is 1000mm (1 meter) long.

How many rods are included?

This product includes 2 pieces of 1.2mm × 1000mm carbon fiber rods.

Can I use 1.2mm carbon rods for RC airplanes?

Yes, they can be considered for suitable lightweight RC aircraft and model-building applications. The correct diameter should be selected according to the design and structural requirements.

Are these carbon rods suitable for drones?

They can be used for suitable lightweight drone, UAV and DIY applications where a thin solid carbon fiber rod is appropriate.

Can I use these rods for a Bionic Butterfly?

Yes. 1.2mm carbon rods can be considered for suitable Bionic Butterfly and ornithopter projects where a slim lightweight rod is required.

Can the rods be cut?

Yes. The 1000mm rods can be cut to the required length using suitable tools and safety equipment.

Are these solid carbon fiber rods?

Yes. These are solid round carbon fiber rods.

What projects can use 1.2mm carbon rods?

They can be useful for RC aircraft, drones, Bionic Butterfly projects, ornithopters, robotics, STEM projects, model making and various DIY applications.

Buy 1.2mm Carbon Rods Online in India

Looking for 1.2mm carbon rods for your next RC plane, drone, Bionic Butterfly, robotics or DIY project?

The 1.2mm Carbon Fiber Rods 1000mm (2 Pcs) from RotorKart provide two full-length rods that can be measured, cut and customized for suitable lightweight applications.

Whether you are building an RC model, repairing an existing project, creating a Bionic Butterfly, developing a robotics prototype or working on a DIY engineering project, these 1.2mm carbon rods provide a convenient option for lightweight custom builds.

Shop 1.2mm carbon rods online at RotorKart and explore different carbon fiber rod sizes for your next project.